MD 5060x

  • Smart, Microprocessor controlled 5kV insulation tester.
  • Measures both the Polarization Index and Dielectric Absorption Index, thus significantly simplifying testing of transformer

  • A portable, battery powered equipment
  • The built-in chronometer automatically counts the elapsed time since the start of measurement
  • Very simple and user friendly operation- just connect the leads, switch on the equipment, select the test voltage and press the start button
  • Automated Polarization Index calculation
  • Automated Dielectric Absorption Ratio calculation
  • Programmable Pass -Fail test
  • Step Voltages Test
  • Stores up to 4000 insulation measurements
  • Supplied in strong and lightweight, easy to carry, impact resistant and suitable to be used under severe weather conditions

Test Voltages   500, 1000V, 2500V, 5000V directly one button selectable, 500V to 5kV in 500V increments, DC, negative
Maximum Resistance Reading   5 TΩ @5kV
DC Voltmeter   -
AC Voltmeter   -
Overvoltage Category   -
Leakage Current Measurement   -
Capacitance Measurement   -
Short Circuit Current   1.5 ±0.5mA
Test Voltage Accuracy   ±3% of nominal test voltages on R≥ 10GΩ
Megohmmeter Basic Accuracy   ±5% of reading ±3 digits (1MΩ to 500GΩ at any test voltage)
Built in Printer   Prints elapsed time, actual voltage and resistance measured each 15 seconds
Interface   USB
Built in Chronometer   Shows elapsed time in mm:ss format. Count starts automatically for each measurement
MegaLogg G2 Software   Friendly, easy to use software. Test are represented in graphic and tabular views with automatic report generator, including the operators commentaries
Environmental Protection   IP54 with closed lid
Safety Class   In accordance with IEC 61010-1
Electro Magnetic Irradiation Immunity   In accordance with IEC 61000-4-3
Electrostatic Immunity   In accordance with IEC 61000-4-2
Power Supply   Internal rechargeable 12V 2.3Ah Battery
Battery Charger   For 100-240V mains
Operating Temperature range   -5C to 50 C
Storage Temperature Range   -25C to 65 C
Humidity range   95% RH (non condensing)
Dimension   274 x 250 x 124 mm
Weight   Approx. 3.6Kg
Internal Current Limiting Resistance   -
Analogue indicator   -

  • Standard Accessories
    • 3 measuring test leads (1.80m)
    • 1 Guard test lead (1.80m)
    • 1 Charger Power cord
    • 1 USB cable
    • 1 MegaLogg2 software
    • 1 User guide
    • 1 Carrying bag

Register Your Product

Related Products
   MD 1035e
   MD 5075x
   MI 5500e
   MI 10kVe
   MI 15kVe
   MI 20kVe
   MI 1050e
   MI 2550e
Request Service
Requested Service
Contact SCOPE
402, Aurus Chamber, Annex A,
S. S. Amrutwar Road, Worli,
Mumbai: 400 013, INDIA.
Phone No: +91-22-4344 4244
Fax No: +91-22-4344 4242
Design By Webworx