|
|
|
- Smart, Microprocessor controlled 1kV insulation tester.
- Measures both the Polarization Index and Dielectric Absorption Index, thus significantly simplifying testing of transformer
- A portable, battery powered equipment
- The built-in chronometer automatically counts the elapsed time since the start of measurement
- Very simple and user friendly operation – just connect the leads, switch on the equipment, select the test voltage and press the start button
- Automated Polarization Index computing
- Automated Dielectric Absorption Ratio Computing
- Supplied in strong and lightweight, easy to carry, impact resistant and suitable to be used under severe weather conditions
| Test Voltages |
|
100, 250, 500, 1000V directly one button selectable, 100V to 1kV in 50V steps, DC, negative |
| Maximum Resistance Reading |
|
1 TΩ |
| DC Voltmeter |
|
- |
| AC Voltmeter |
|
- |
| Overvoltage Category |
|
- |
| Leakage Current Measurement |
|
- |
| Capacitance Measurement |
|
- |
| Short Circuit Current |
|
1.5 ±0.5mA |
| Test Voltage Accuracy |
|
±3% of nominal test voltages on R≥ 10GΩ |
| Megohmmeter Basic Accuracy |
|
±5% of reading ±3 digits (1MΩ to 500GΩ at any test voltage) |
| Built in Printer |
|
- |
| Interface |
|
USB |
| Built in Chronometer |
|
Shows elapsed time in mm:ss format. Count starts automatically for each measurement |
| MegaLogg G2 Software |
|
- |
| Environmental Protection |
|
IP54 with closed lid |
| Safety Class |
|
In accordance with IEC 61010-1 |
| E.M.C |
|
|
| Electro Magnetic Irradiation Immunity |
|
In accordance with IEC 61000-4-3 |
| Electrostatic Immunity |
|
In accordance with IEC 61000-4-2 |
| Power Supply |
|
Internal rechargeable 12V 2.3Ah Battery |
| Battery Charger |
|
For 100-240V mains |
| Operating Temperature range |
|
-5°C to 50° C |
| Storage Temperature Range |
|
-25°C to 65° C |
| Humidity range |
|
95% RH (non condensing) |
| Dimension |
|
274 x 250 x 124 mm |
| Weight |
|
Approx. 3Kg |
| Internal Current Limiting Resistance |
|
- |
| Analogue indicator |
|
- |
- Standard Accessories
- Measuring test leads, 1.80m (2)
- Guard test lead 1.80m
- Charger Power cord
- Operating instructions
- Carrying case for Test Lead Set – 1 No
|
|
|
|
